Canon imageRUNNER 2320, Reference Manual

Page: 105 / 292

Specifying Common Settings 3-11
Usef
ul Fun
c
ti
o
n
s
a
nd Set
ti
ng
s
3
4
Press (Reset) to return to the Standby display.
Auto Paper Selection/Auto Drawer Switching
The machine’s Automatic Paper Selection (APS) and Automatic Drawer Switching
(ADS) functions enable you to specify which paper source(s) can be used for a
specific purpose. This setting can be made independently for all functions of the
machine (such as Copy and Print), and is especially useful when you want to use
different paper sources for different purposes.
NOTE
•
The following functions are applied to paper sources that are set to ‘On’:
- APS: The machine automatically selects the appropriate paper size (paper source)
based on the original’s size and copy ratio settings (when making a copy).
- ADS: If a paper source runs out of paper during a continuous print job, the machine
automatically selects another paper source loaded with the same size paper, and
begins feeding paper from that paper source.
•
The default settings are ‘Off’ for the stack bypass, and ‘On’ for the other paper sources.
1
Press (Additional Functions)
➞
use [ ] or [ ] to select
<Common Settings>
➞
press [OK].
For help, see the screen shots in step 2 of “Initial Function at Power ON,” on p. 3-5.
The Common Settings menu appears.
3
Use [ ] or [ ] to adjust the
density from light (-) to dark (+)
➞
press [OK].
The selected mode is set.
2
Use [ ] or [ ] to select <Auto
Drawer Select>
➞
press [OK].
The Auto Drawer Select menu appears.
Printer Density
Auto Clear Setting
Toner Save Mode
Printer Density
Auto Drawer Select
Common Settings