manualshive.com logo in svg

Canon imageRunner 2220i, User Manual

Share
Download
Canon imageRunner 2220i User Manual Download Page 300

Storing New Addresses (Store/Edit Address Book)

4-25

Register

ing/Editing Address Book Settings

4

The maximum number of digits you can store for an Access Number is seven. If 
you store an Access Number with less than seven digits, the machine stores 
them as follows:
- Example: If <321> is entered, it is stored as <0000321>.

You cannot store an access number with only zeros as the number, such as 
<0000000>.

The display returns to the Store New Address screen.

NOTE

If there is a required item which has not yet been entered, enter the necessary 
item.

13

Press [Done] repeatedly until the to the Send Basic Features 
screen appears.

Storing File Server Addresses

IMPORTANT

If Language Switch in Common Settings (from the Additional Functions screen) is set to 
‘On’, the Host Name and File Path of the file server destination may not be displayed 
correctly, so you may not be able to refer to them.

NOTE

•

For examples of the settings needed to send to a file server, see the 

Network Guide

.

•

For details on how to enter characters on the touch panel display, see Chapter 1, “Before 
You Start Using This Machine,” in the 

Reference Guide

. 

1

Press

(Additional Functions) 

➞

 [Address Book Settings] 

➞

 

[Store/Edit Address Book].

If a password is set for the address book, press [Address Book Settings] 

➞

 enter 

the password 

➞

 press [OK]. (See Chapter 4, “System Manager Settings,” in the 

Reference Guide

.)

Summary of Contents for imageRunner 2220i



















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands