manualshive.com logo in svg

Canon imageRunner 2220i, User Manual

Share
Download
Canon imageRunner 2220i User Manual Download Page 214

Various Receiving Functions

2-5

2

Receiving a Document

Received Documents Processing

The following illustration shows how received I-Fax/Fax documents are processed:

*1 If Store/Print Received Doc. in Forwarding Settings in System Settings (from the Additional Functions screen) is set 

to ‘On’, forwarded documents are either printed or stored in the Memory RX Inbox.

*2 If a document sent from another machine has a subaddress or password attached, reception is rejected if the 

forwarding conditions set in the System Manager setting from Additional Functions screen are not met. 

*3 If you have set the machine to forward documents that do not match the forwarding conditions in Forwarding 

Settings in System Settings (from the Additional Functions screen), all received documents that do not match the 
specified forwarding conditions are forwarded to the specified destination.

*4 If documents are received when the machine is out of paper or toner, or when there is a paper jam, they are printed 

after paper or the toner cartridge is replaced, or after the paper jam is cleared.

*5 If Erase Failed TX is set to ‘Off’ in TX Settings under <Common Settings> in Communications Settings (from the 

Additional Functions screen), the status of any job with a forwarding error will be saved in the System Monitor 
screen.

*6 Documents with forwarding errors are handled as follows, depending on the settings for Handle Documents with 

Forwarding Errors in TX Settings under <Common Settings> in Communications Settings (from the Additional 
Functions screen):
[Always Print]: All documents with forwarding errors are printed.
[Store/Print]:  Documents with forwarding errors are stored in the Memory RX Inbox when Memory Lock is turned 

‘On’. If Memory Lock is turned ‘Off’, the documents are printed.

*7 If Forwarding Done Notice is specified in Forwarding Settings in System Settings (from the Additional Functions 

screen), a notification e-mail is sent when the forwarding job completes successfully.

*8 If Forwarding Done Notice is specified in Forwarding Settings in System Settings (from the Additional Functions 

screen), a notification e-mail is sent when the forwarding job completes successfully. However, if [Notice Only for 
Errors] is also specified, a notification e-mail is sent only when the document is not forwarded successfully.

: Flows of default settings 
  or normal operation

: Flows with conditions

Receive

ON

Forwarded to 
specified 
destination

Confidential Fax Inbox

OFF/
Does Not Meet 
the Conditions

Destinations 
Not Stored

Destination(s) 
Stored

Forwarding 
Error

Handle Documents
with Forwarding
Errors

Forwarding 
Done Notice

Forwarding 
Settings

*4

*3

ON

Confirming Details, 
Erase, Print of received 
documents

OFF

Memory Lock 
Setting

Memory RX Inbox

Confirming Details, Erase, 
Print, Sending of received 
documents

Store in the 
Status Screen

Confirming Details, 
Resend, Change 
Destinations, Erase
of documents with 
transmission error

Prints

*7

*5

*6

*4

*8

*8

*1

Print Queue

Forward w/o 
Conditions

*2

Reception
rejected

Print Queue

Prints

Store

Prints

Summary of Contents for imageRunner 2220i



















































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands