Canon ImageRunner 2030i, Copying Manual

Page: 50 / 156

Paper Selection 2-5
2
B
a
si
c C
o
p
y
ing
F
e
atu
res
Paper Selection
You can manually specify a paper size or set the machine to automatically select
the paper size for you.
NOTE
•
If you are copying an original with an image that extends all the way to the edges onto the
same size paper at a copy ratio of 100%, the periphery of the original image may be cut
off slightly on the copy. For more information on how much may be cut off, look under the
margin areas in the Specifications table in Chapter 9 “Appendix,” in the
Reference Guide .
•
If you select [Envelope], [Transparency], or [Labels], make sure that you do not specify
any Finishing modes (Collate, Group, or Staple).
•
If Stack Bypass Standard Settings in Common Settings (from the Additional Functions
screen) is set to ‘On’, and the paper size/type have been stored, the selected paper size/
type are displayed on the Paper Select screen. (See Chapter 4, “Customizing Settings,”
in the
Reference Guide .)
•
For instructions on loading paper into the stack bypass, see Chapter 2, “Basic
Operations,” in the
Reference Guide .
•
The default setting is ‘Auto’.
Automatic Paper Selection
The machine automatically selects the copy paper size.
IMPORTANT
•
For the imageRUNNER 2018i, the Automatic Paper Selection mode is available only if
the originals are fed from the feeder.
•
The Automatic Paper Selection mode cannot be used with the Auto Zoom or Image
Combination mode.
•
You cannot use the Automatic Paper Selection mode when copying the following types of
originals. Copy these originals using the Manual Paper Selection mode.
- Nonstandard size originals
- Highly transparent originals, such as transparencies
- Originals with an extremely dark background
- STMT or STMTR originals that are placed on the platen glass
NOTE
If Drawer Eligibility For APS/ADS in Common Settings (from the Additional Functions
screen) is set to ‘Off’ for a particular paper source, you cannot make copies on paper
loaded in that paper source in the Automatic Paper Selection mode. (See Chapter 4,
“Customizing Settings,” in the
Reference Guide .)