Canon IMAGERUNNER 2016 Reference Manual Download Page 182

Page: 182 / 306

Department ID Management

6-15

Syst

ana

Set

tin

Erasing the Department ID and Password

You can erase the Department ID and password that you have registered.

NOTE

If Department ID Management is activated through the optional Card Reader-E1, you
cannot delete the Department ID.

Press [Additional Functions]

➞

[

] or [

] until

<SYSTEM SETTINGS> appears

➞

press [OK].

If necessary, see the screen shots in steps 1 and 2 of "Specifying Department ID
Management," on p. 6-8.

If the System Manager ID and System Password have been set, enter the System
Manager ID and System Password using the numeric keys

➞

press

(ID).

The <SYSTEM SETTINGS> menu appears.

Press [

] or [

] until <MANAGE DEPT. ID> appears

➞

press [OK].

If necessary, see the screen shots in step 3 of "Specifying Department ID
Management," on p. 6-8.

The <MANAGE DEPT. ID> menu appears.

Press [

] or [

] to select <ON>

➞

press [OK].

If necessary, see the screen shots in step 4 of "Specifying Department ID
Management," on p. 6-8.

Press [

] or [

] until <REGISTER DEPT. ID> appears

➞

press [OK].

If necessary, see the screen shots in step 4 of "Registering the Department ID,
Password, and Page Limit," on p. 6-9.

The <REGISTER DEPT. ID> menu appears.

Additional

Functions

Summary of Contents for IMAGERUNNER 2016



















































































































































































































































































































Search results

Summary of Contents for IMAGERUNNER 2016

Reviews:

Related manuals for IMAGERUNNER 2016

Brands by name

Popular brands

Canon IMAGERUNNER 2016, Reference Manual

Search results

Summary of Contents for IMAGERUNNER 2016

Reviews:

Related manuals for IMAGERUNNER 2016

Brands by name

Popular brands