Canon imageRUNNER 2016 Series Service Manual Download Page 31

 imageRUNNER 2016/2020 Series Service Guide

 

imageRUNNER 2016/2020 Series Service Guide  

Rev. 0 November2005 

 

Page 26

C.  Canon GPR-18 Drum Unit Limited Warranty 

Canon U.S.A., Inc. and Canon Canada, Inc. (collectively "Canon") warrant the Drum Unit incorporated into the imageRUNNER 
Series product (the "Product") packaged with this Limited Warranty (the "Drum Unit") to be free from defects in workmanship and 
materials under normal use and service, other than exterior defects, such as nicks, scratches, or dents, for a period of 30 days after 
delivery to the original purchaser of the Drum Unit or use of it to make 12,000 prints or copies (or a combination of both), whichever 
comes first.  If the Drum Unit proves to be defective within this warranty period, Canon shall, at its sole option, replace it without 
charge. 
 
Following the expiration of the 30 day warranty period, and continuing for a period of ONE YEAR after delivery to the original 
purchaser of the Drum Unit or use of it to make 44,000 prints or copies (or a combination of both), whichever comes first, Canon 
shall provide a credit ("Credit") to the original purchaser toward a replacement Drum Unit if the Drum Unit fails to operate under 
normal use and service by reason of any defect in workmanship and materials, other than exterior defects, such as nicks, scratches 
or dents.  The Credit shall be a percentage of Canon's then current dealer price for the replacement Drum Unit determined as set 
forth in the example below. 
 
Warranty replacement shall not extend the original warranty period of the Drum Unit. 
 
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES AND CONDITIONS, EXPRESS OR IMPLIED, INCLUDING ANY 
IMPLIED WARRANTIES AND CONDITIONS REGARDING MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, 
RELATING TO THE USE OR PERFORMANCE OF THE DRUM UNIT. NO OTHER EXPRESS WARRANTY, CONDITION OR 
GUARANTY, EXCEPT AS MENTIONED ABOVE, GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THE 
DRUM UNIT SHALL BIND CANON OR ANY AUTHORIZED SERVICE PROVIDER. NO WARRANTY IS GIVEN ON ANY USED 
DRUM UNIT. 
 
This warranty shall be void and of no force and effect if the Drum Unit is damaged as a result of  (a) abuse, neglect, mishandling, or 
alteration of the Drum Unit, a Product Accessory or a Product in which the Drum Unit is incorporated, electric current fluctuation, 
exposure to light, or accident, (b) improper use, including failure to follow operating or maintenance instructions in, or environmental 
conditions prescribed in, Canon's operator's manual or other documentation, (c) installation or repair by other than service 
representatives qualified by Canon who are acting in accordance with Canon's service bulletins, or (d) use of supplies or parts (other 
than those distributed by Canon) which damage the Drum Unit or cause abnormally frequent service calls or service problems. Nor 
does this warranty extend to any Drum Unit on which the original identification marks or serial numbers have been defaced, 
removed, or altered. 
 
NEITHER CANON NOR ANY AUTHORIZED SERVICE PROVIDER SHALL BE LIABLE FOR PERSONAL INJURY OR PROPERTY 
DAMAGE (UNLESS CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON OR ANY AUTHORIZED SERVICE 
PROVIDER), LOSS OF REVENUE OR PROFIT, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, EXPENDITURES FOR 
SUBSTITUTE EQUIPMENT OR SERVICES, LOSS OR CORRUPTION OF DATA, STORAGE CHARGES OR OTHER SPECIAL, 
INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE OR INABILITY TO USE THE DRUM UNIT, 
REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED AND EVEN IF CANON OR ANY AUTHORIZED 
SERVICE PROVIDER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY 
KIND AGAINST CANON OR ANY AUTHORIZED SERVICE PROVIDER BE GREATER IN AMOUNT THAN THE PURCHASE 
PRICE OF THE DRUM UNIT CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, THE PURCHASER 
ASSUMES ALL RISKS AND LIABILITY FOR LOSS, DAMAGE OR INJURY TO PERSONS AND PROPERTY OF THE 
PURCHASER OR OTHERS ARISING OUT OF THE POSSESSION, USE, MISUSE, OR INABILITY TO USE ANY DRUM UNIT 
NOT CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON OR ANY AUTHORIZED SERVICE PROVIDER.  
THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THE DRUM UNIT AND 
STATES SUCH PURCHASER'S EXCLUSIVE REMEDY. 
 
CONDITIONS OF WARRANTY 
The defective Drum Unit must be returned to Canon, freight prepaid, in the original packaging with all necessary documentation 
(machine log, a sample copy, warranty claim tag or other documents as required from time to time) to receive the Credit or 
replacement Drum Unit. 
 
Credits will be based on the then current dealer price for the replacement Drum Unit, and will be pro-rated based on the copies 
made as indicated by the service report submitted by the Canon Authorized Service Representative. 
 
EXAMPLE OF CREDIT 
 
Drum Unit inoperative after 22,000 prints or copies (or a combination of both) in less than ONE YEAR of use. 
Calculation of the Credit may be illustrated by the following example: 

 
Calculation: 

44,000 – 22,000 = 22,000  =  50% of the dealer price of the replacement Drum Unit. 

     44,000           44,000 

 
THIS WARRANTY APPLIES TO DRUM UNITS SOLD AND USED IN THE U.S.A. AND CANADA ONLY. 

CANON U.S.A., INC

One Canon Plaza 
Lake Success, New York 11042-9979 

CANON CANADA, INC. 

6390 DIXIE ROAD 
MISSISSAUGA, ONTARIO L5T 1P7, Canada 

 

FA7-7459   (000) 

Summary of Contents for imageRUNNER 2016 Series

































Reviews: