manualshive.com logo in svg

Canon imageRunner 2004, User Manual

Share
Download
Canon imageRunner 2004 User Manual Download Page 50

Loading Paper in the Paper Drawer

1053-00R

Load the paper that you usually use in the paper drawer. When you want to print on paper that is not loaded in the

paper drawer, load the paper in the multi-purpose tray.   Loading Paper in the Multi-Purpose Tray(P. 46)

1

Hold the handle of the paper drawer and pull it out until it stops.

2

Push down the metal plate to lock it.

3

Adjust the position of the paper guides.

When loading paper in the paper drawer 1

While squeezing the top
part of the right guide, slide
it to align with the size
indicator for the paper to be
loaded.

Basic Operations

42

Summary of Contents for imageRunner 2004













































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands