Job Management
2-20
Remote UI Functions
2
Managing the iR3300/2800/2200 Fax Send and Receive Jobs
The Remote UI allows you to delete fax jobs and change the receive mode (RX
mode). (The fax function is only available when the fax board is installed with the
iR3300/2800/2200.)
NOTE
•
To set the machine to receive mode, set the memory lock and the transfer settings to [On]
by pressing
(Additional Functions)
➞
[System Settings]
➞
[Communications Settings]
➞
[Memory Lock Setting] or [Transfer Setting]. You can also set the machine to receiving
mode using the Remote UI by pressing [Add. Func.]
➞
[Custom Settings]
➞
[Transfer
settings] or [Memory Lock Settings].
•
For a detailed explanation of the receive mode, see Chapter 3, "Special Fax Functions,"
in the
Facsimile Guide
.
1
Click [Job Status]
➞
select the job type from the menu that
appears under [Job Status].
If a dialog box prompting you to enter the user name and password appears,
enter the Department ID and password
➞
click [OK].
If you want to display the fax send job, click [Sending Fax Job]. If you want to
display the fax receive job, click [Receive Fax Job].
The list of jobs for the selected job type is displayed.
