Canon imageRUNNER 1025, Basic Operation Manual, Page: 98 / 327

C
op
ying
4-11
Selecting Paper Source
8
Press [ ] or [ ] to select the paper
type, then press [OK].
P L A I N P A P E R
S E L E C T P A P E R T Y P E
To copy onto nonstandard size paper, select the
paper type from the followings:
<PLAIN PAPER>, <COLOR>, <RECYCLED>,
<HEAVY PAPER 1>, <HEAVY PAPER 2>, <HEAVY
PAPER 3>, <BOND>, <3HOLE PUNCH PAPER>,
<TRANSPARENCY>, <LABELS>, <ENVELOPE>
For details, see “For the Stack Bypass” on p. 2-15.
9
Enter the desired copy quantity (1 to 99)
using – [numeric keys].
A T E X T
1 0 0 % L T R
0 1
10 10
Press [Start].
If you want to copy multiple originals using the
platen glass, set an original and press [Start]
for each original, once for each page.
Using the Stack Bypass with Envelopes Using the Stack Bypass with Envelopes
This section describes how to copy onto envelopes using the stack bypass.
If <BYPASS STD SET> in <COMMON SETTINGS> is set to <OFF>, the display to specify the paper size and type for the stack bypass
appears every time you load paper on the stack bypass. If <BYPASS STD SET> is set to <ON>, copying can be performed only for the
registered paper size and type. (See “Setting Paper Type and Size,” on p. 2-13.)
1
Set originals.
For details, see “Placing Originals,” on p. 2-4.
2
Press [COPY].
3
Press [Paper Select] repeatedly to
select the stack bypass.
The paper select indicator of the selected paper
source lights. (See “Operation Panel,” on p. 1-5.)
4
Load postcards/envelopes into the stack
bypass.