Canon imageRUNNER 1025, Basic Operation Manual, Page: 85 / 327

Reg
ist
ering Destinations in the A
ddr
ess Book (imageRUNNER 1025iF Only)
3-22
Storing/Editing Coded Dial Codes
8
Repeat step 5 to 7 to edit the desired
items.
9
Press [Stop] to return to the standby
mode.
Editing Coded Dial Codes (Group Addresses) Editing Coded Dial Codes (Group Addresses)
This section describes the procedure for adding a new destination to the group, deleting a destination from
the group, or changing the group name registered in the coded dial codes.
1
Press [Additional Functions].
2
Press [ ] or [ ] to select <ADDRESS
BOOK SET.>, then press [OK].
4 . A D D R E S S B O O K S E T .
A D D . F U N C T I O N S
If a password has been set for the Address Book,
enter the password using – [numeric keys],
then press [OK].
3
Press [ ] or [ ] to select <GROUP
DIAL>, then press [OK].
4 . G R O U P D I A L
A D D R E S S B O O K S E T .
4
Press [Coded Dial], then enter the
three-digit code using – [numeric
keys].
[ * 0 0 1 ] G R O U P D I A L
G R O U P D I A L
■ If you want to add a new destination to the
group:
①
Press [ ] or [ ] to select <SELECT ADD/
TEL NO>, then press [OK].
1 . S E L E C T A D D / T E L N O
G R O U P D I A L
② Select the destination you want to add to
the group, then press [OK].
[ 0 8 ] J o h n ( I - f a x )
= j o h n @ i f a x . c o m
For details on specifying a destination from
Address Book, see “Registering Group Addresses in
Coded Dial Codes,” on p. 3-20.
■ If you want to delete a destination from the
group:
①
Press [ ] or [ ] to select <SELECT ADD/
TEL NO>, then press [OK].
1 . S E L E C T A D D / T E L N O
G R O U P D I A L
②
Press [ ] or [ ] to display the
destination you want to delete from the
group, then press
[Clear].
[ * 0 0 1 ] J o h n
= 4 5 6 X X X X X X X
Ex.
③
Repeat step
②
if you want to delete
another destination.
④
Press [OK].
■
If you want to change the group name:
①
Press [ ] or [ ] to select <NAME>, then
press [OK].
2 . N A M E
G R O U P D I A L