Canon imageRUNNER 1025, Basic Operation Manual

Page: 77 / 327

Reg
ist
ering Destinations in the A
ddr
ess Book (imageRUNNER 1025iF Only)
3-14
Storing/Editing Coded Dial Codes Storing/Editing Coded Dial Codes
Registering Fax Numbers in Coded Dial Codes Registering Fax Numbers in Coded Dial Codes
This section describes the procedure for registering fax numbers in the coded dial codes.
1
Press [Additional Functions].
2
Press [ ] or [ ] to select <ADDRESS
BOOK SET.>, then press [OK].
4 . A D D R E S S B O O K S E T .
A D D . F U N C T I O N S
If a password has been set for the Address Book,
enter the password using – [numeric keys],
then press [OK].
3
Press [ ] or [ ] to select <CODED
SPD DIAL>, then press [OK].
3 . C O D E D S P D D I A L
A D D R E S S B O O K S E T .
4
Press [ ] or [ ] to select a coded dial
code (000 to 176) for which you want to
register the fax number, then press [OK].
[ * 0 0 0 ] N O T R E G I S T E R E D
C O D E D S P D D I A L
You can also select a coded dial code by
pressing
[Coded Dial] followed by the
desired three digit code.
5
Confi rm that <FAX> is displayed, then
press [OK].
F A X
C O D E D S P D D I A L
6
Confi rm that <NAME> is displayed, then
press [OK].
1 . N A M E
C O D E D S P D D I A L
7
Enter the destination name (16 letters
maximum, including spaces) using
– [numeric keys], then press [OK].
J o h n ( F A X )
N A M E : a
Ex.
8
Confi rm that <TEL NUMBER ENTRY> is
displayed, then press [OK].
2 . T E L N U M B E R E N T R Y
C O D E D S P D D I A L
9
Enter the fax number you register (120
digits maximum, including spaces and
pauses) using – [numeric keys], then
press [OK].
0 1 2 X X X X X X X
T E L N U M B E R E N T R Y
Ex.
10 10
Confi rm that <OPTIONAL SETTING> is
displayed, then press [OK].
3 . O P T I O N A L S E T T I N G
C O D E D S P D D I A L