Canon imageRUNNER 1025, Basic Operation Manual

Page: 43 / 327

Bef
or
e U
sing the M
achine
1-14
Timer Settings Timer Settings
The timer settings enables you to set the sleep mode, the auto clear time, and the daylight
saving time.
Setting the Sleep Mode Setting the Sleep Mode
When the machine remains idle for a certain period of time, it automatically enters the Sleep mode. This
section describes how to set the period of time until the machine enters the Sleep mode. The default settings
are <ON> and <5MIN>.
1
Press [Additional Functions].
2
Press [ ] or [ ] to select <TIMER
SETTINGS>, then press [OK].
6 . T I M E R S E T T I N G S
A D D . F U N C T I O N S
3
Press [ ] or [ ] to select <AUTO
SLEEP TIME>, then press [OK].
4 . A U T O S L E E P T I M E
T I M E R S E T T I N G S
4
Confi rm that <ON> is displayed, then
press [OK].
O N
A U T O S L E E P T I M E
5
Press [ ] or [ ] to select the desired
interval, then press [OK].
5 M I N .
A U T O S L E E P T I M E
You can set the interval from 3 to 30 minutes (in
one minute increments).
You can also enter values using – [numeric
keys].
6
Press [Stop] to return to the standby
mode.
To resume the normal mode from the Sleep
mode, press
[Power] on the operation panel.
To enter the Sleep mode manually, press
[Power] on the operation panel.
The machine will not enter the Sleep mode
when:
the machine is in operation
a system error occurs
a paper jam occurs in the machine
the handset of the external telephone is off
the hook*
The machine will leave the Sleep mode when:
you press [Power] on the operation panel
a computer performs a scan through the
machine
the handset of the external telephone is off
the hook*
a print job is sent from a computer, and the
print is started
* Only for the imageRUNNER 1025iF
–
–
–
•
•
•
•
–
•
•
•
•