manualshive.com logo in svg

Canon imageRUNNER 1025, Basic Operation Manual, Page: 264 / 327

Share
Download
Canon imageRUNNER 1025 Basic Operation Manual Download Page 264

12-15

M

aint

enanc

e 

 

 

      Transporting the Machine  

Transporting the Machine  

 Follow this procedure to avoid vibration damage to the machine when transporting it over a 

long distance. 

 

 

 Be sure at least two people carry the machine. 

 1

 

Disconnect the power cord and all the 
cables from the back of the machine. 

 2

 

Make sure the stack bypass and the paper 
stopper are back in their original position. 

 3

 

Pick up the machine using the provided 
hand grips on the left and right sides. 

 

 

Be sure at least two people carry the machine.
Do not lift the machine by any of its 
attachments. Dropping the machine can cause 
personal injury.
If you are using the Cassette-Feeding Module-
N2 (optional), transport the machine and the 
Cassette-Feeding Module-N2 separately. If you 
transport the machine with the Cassette-
Feeding Module-N2 being installed, you may 
drop the machine.
If you have a back problem, make sure to check 
the weight of this machine before carrying. (See 
“Specifi cations,” on p. 15-2.)

–
–

–

–

Summary of Contents for imageRUNNER 1025








































































































































































































































































































































Reviews:

No comments