Canon imageRUNNER 1025, Basic Operation Manual

Page: 181 / 327

Fax (imageRUNNER 1025iF Only)
5-58
Setting the Incoming Ring Setting the Incoming Ring
This function enables you to activate the ring alert of the external telephone if <RX MODE>
is set to <FaxOnly> or <FaxTel>. Selecting <ON> in <INCOMING RING> enables you to
distinguish between the fax reception and answer voice calls when you pick up the external
telephone while it is ringing.
The default setting is <OFF>.
1
Press [Additional Functions].
2
Press [ ] or [ ] to select <TX/RX
SETTINGS>, then press [OK].
3 . T X / R X S E T T I N G S
A D D . F U N C T I O N S
3
Press [ ] or [ ] to select <FAX
SETTINGS>, then press [OK].
2 . F A X S E T T I N G S
T X / R X S E T T I N G S
4
Press [ ] or [ ] to select <RX
SETTINGS>, then press [OK].
3 . R X S E T T I N G S
F A X S E T T I N G S
5
Press [ ] or [ ] to select <INCOMING
RING>, then press [OK].
5 . I N C O M I N G R I N G
R X S E T T I N G S
6
Press [ ] or [ ] to select <ON>, then
press [OK].
O N
I N C O M I N G R I N G
If you select <OFF>, the telephone does not ring
when the machine receives a voice call or fax.
(In the Sleep mode, the telephone may ring one
or two times, if <ENERGY IN SLEEP> in <COMMON
SETTINGS> is set to <LOW>.)
7
Press [ ] or [ ] to select the number
of incoming rings (1 to 99 times) before
the machine answers.
2 T I M E S
R I N G C O U N T
8
Press [Stop] to return to the standby
mode.