Canon imageRUNNER 1025, Basic Operation Manual

Page: 171 / 327

Fax (imageRUNNER 1025iF Only)
5-48
Checking the Dial Line before Sending Checking the Dial Line before Sending
The following redirection problem may happen with certain kinds of fax machines on the
market made by companies other than Canon. The Check Dial Line Before Sending mode
prevents this rare occurrence from happening.
If you are sending a fax document from your machine at the same time another fax machine
(made by a company other than Canon) is trying to send you a fax, your fax document may
end up being redirected to that fax machine, instead of the original destination you had
intended.
Setting <DIALING LINE CHCK> to <ON> enables you to avoid such sending problems.
The default setting is <OFF>.
For more information on how to turn the main power on and off , see “Connect Power Cord and Turn on the Machine,” in the Quick
Start Guide.
1
Press [Additional Functions].
2
Press [ ] or [ ] to select <TX/RX
SETTINGS>, then press [OK].
3 . T X / R X S E T T I N G S
A D D . F U N C T I O N S
3
Press [ ] or [ ] to select <FAX
SETTINGS>, then press [OK].
2 . F A X S E T T I N G S
T X / R X S E T T I N G S
4
Press [ ] or [ ] to select <TX
SETTINGS>, then press [OK].
2 . T X S E T T I N G S
F A X S E T T I N G S
5
Press [ ] or [ ] to select <DIALING
LINE CHCK>, then press [OK].
5 . D I A L I N G L I N E C H C K
T X S E T T I N G S
6
Press [ ] or [ ] to select <ON>, then
press [OK].
O N
D I A L I N G L I N E C H C K
7
Press [Stop] to return to the standby
mode.