Canon imageRUNNER 1025, Basic Operation Manual

Page: 164 / 327

Fax (imageRUNNER 1025iF Only)
5-41
Standard Send Settings Standard Send Settings
This mode enables you to change the standard settings for the Send function, including the
scan mode.
Storing the Standard Send Settings Storing the Standard Send Settings
1
Press [Additional Functions].
2
Press [ ] or [ ] to select <TX/RX
SETTINGS>, then press [OK].
3 . T X / R X S E T T I N G S
A D D . F U N C T I O N S
3
Press [ ] or [ ] to select <COMMON
SETTINGS>, then press [OK].
1 . C O M M O N S E T T I N G S
T X / R X S E T T I N G S
4
Press [ ] or [ ] to select <TX
SETTINGS>, then press [OK].
1 . T X S E T T I N G S
C O M M O N S E T T I N G S
5
Press [ ] or [ ] to select <STANDARD
SETTINGS>, then press [OK].
5 . S T A N D A R D S E T T I N G S
T X S E T T I N G S
6
Press [ ] or [ ] to select the desired
setting item, then press [OK].
1 . D E N S I T Y
S T A N D A R D S E T T I N G S
You can specify the following settings:
<DENSITY>: Sets the default density for the
document you send (<STANDARD> (standard
density), <DK> (darkest) or <LT> (lightest)).
(See “TX/RX SETTINGS,” on p. 14-8.)
<IMAGE QUALITY>: Sets the default image
quality for the document you send. (See “TX/
RX SETTINGS,” on p. 14-8.)
<IMAGE FORMAT>: Sets the default fi le format
for the document you send. (See “TX/RX
SETTINGS,” on p. 14-8.)
<ORIGINAL TYPE>: Sets the default original
type for the document you send. (See “TX/RX
SETTINGS,” on p. 14-8.)
<DIVIDE INTO PAGES>: Sets whether to use
<DIVIDE INTO PAGES> as default. (See “TX/RX
SETTINGS,” on p. 14-8.)
<DIRECT TX>: Sets whether to use <DIRECT
TX> as default. (See “TX/RX SETTINGS,” on
p. 14-8.)
7
Each time you set the desired setting
item, press [OK].
8
Press [Stop] to return to the standby
mode.
–
–
–
–
–
–