Canon imageRUNNER 1025, Basic Operation Manual, Page: 115 / 327

C
op
ying
4-28
Erasing Shadows/Lines
Original Frame Erase Original Frame Erase
This mode erases the dark borders and frame lines that appear around the copy if the original is smaller than
the selected paper size. You can also use this mode to create a blank border around the edge of the copy.
The Original Frame Erase mode cannot be used with the 2 on 1 mode.
1
Set originals.
For details, see “Placing Originals,” on p. 2-4.
2
Press [COPY].
3
Press [Frame Erase].
4
Press [ ] or [ ] to select <ORIGINAL
FR.>, then press [OK].
O L I G I N A L F R .
F R A M E E R A S E
5
Press [ ] or [ ] to select the size of
the original, then press [OK].
L T R
O L I G I N A L S I Z E
6
Press [ ] or [ ] to set the frame erase
width for all four borders, then press [OK].
1 / 8 "
A L L F R . S A M E W D
The width ranges 1/16" to 1 15/16" (1 to 50 mm).
7
Enter the desired copy quantity (1 to 99)
using – [numeric keys].
A T E X T
1 0 0 % * L T R
0 1
8
Press [Start].
If you want to copy multiple originals using the
platen glass, set an original and press [Start]
for each original, once for each page.
To cancel all settings, press [Reset].