manualshive.com logo in svg

Canon imagePROGRAFi iPF840 series, User Manual

Share
Download
Canon imagePROGRAFi iPF840 series User Manual Download Page 642

Roll x is empty. (x is 1 (Upper) or 2 (Lower))

Roll x is empty. (x is 1 (Upper) or 2 (Lower))

Cause

Corrective Action

The tailing edge of the
paper was detected
because cut sheets
were loaded in the roll
paper Paper Feed Slot.

Follow these steps to install the roll paper.

1.

Press the 

OK

 button and remove the paper.

2.

Load the new roll.

 (See "

Attaching the Roll Holder to Rolls

.")

➔

P.342

 (See "

Loading Rolls in the Printer

.")

➔

P.345

3.

If no barcode was printed on the roll, specify the type of paper.

 (See "

Changing the Type of Paper

.")

➔

P.350

4.

If no barcode was printed on the roll, specify the paper length.

 (See "

Specifying the Paper Length

.")

➔

P.352

5.

If "

Not finished printing. Finish printing remaining jobs?

" is shown on the Display Screen, press

the 

OK

 button.

Printing will resume, starting from the page on which the error occurred.

"

Lift the release lever and replace the roll.

"

Cause

Corrective Action

The roll is empty.

Follow these steps to replace the used roll with a new roll of the same
type and size.

1.

Lift the Release Lever and remove the roll.

 (See "

Removing the Roll from the Printer

.")

➔

P.352

 (See "

Removing the Roll Holder from Rolls

.")

➔

P.356

2.

Load the new roll.

 (See "

Attaching the Roll Holder to Rolls

.")

➔

P.342

 (See "

Loading Rolls in the Printer

.")

➔

P.345

3.

If no barcode was printed on the roll, specify the type of paper.

 (See "

Changing the Type of Paper

.")

➔

P.350

4.

If no barcode was printed on the roll, specify the paper length.

 (See "

Specifying the Paper Length

.")

➔

P.352

5.

If "

Not finished printing. Finish printing remaining jobs?

" is

shown on the Display Screen, press the 

OK

 button.

Printing will resume, starting from the page on which the error oc-
curred.

There is remaining roll paper, but because it could not be
advanced, it could not be detected.

The unused portion of the roll is heavy, and this is placing a burden on
the printer. It may be helpful to change the printing mode, which will
change the paper feed timing.
Choose a higher level of 

Print Quality

 in the 

Advanced Settings

 of

the printer driver.

 (See "

Giving Priority to Particular Graphic Elements and Colors for

Printing

.")

➔

P.66

No Roll Unit.

No Roll Unit.

Cause

Corrective Action

The printer has received a print job that specifies Roll 2 (Lower), but the Roll
Unit is not installed.

Press the 

Stop

 button and stop printing.

 

1.

Turn the printer off and install the Roll Unit.
Connect the Roll Unit Cable firmly and completely.

2.

Turn the printer on and resend the print job.

Roll x is empty. (x is 1 (Upper) or 2 (Lower))

                                                                                                                                                             

iPF840

                                                                                                                                                                                                                     

User's Guide

 

 

Error Message

Messages regarding paper

 

642

Summary of Contents for imagePROGRAFi iPF840 series







































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands