manualshive.com logo in svg

Canon imagePROGRAFi iPF840 series, User Manual

Share
Download
Canon imagePROGRAFi iPF840 series User Manual Download Page 482

2.

Press the 

OK

 button.

The 

Set./Adj. Menu

 is displayed.

3.

Press 

▲

 or 

▼

 to select 

Interface Setup

, and then press the 

OK

 button.

4.

Press 

▲

 or 

▼

 to select 

Ethernet Driver

, and then press the 

OK

 button.

5.

Press 

▲

 or 

▼

 to select 

MAC Address

, and then press the 

OK

 button.

Note

•

If the 

Tab Selection screen

 is not displayed, press the 

Menu

 button.

•

You can investigate the MAC address by printing an interface setting report.

 (See "

Printing Interface Setting Reports

.")

➔

P.458

2

In Windows, open a command prompt, or in Mac OS, start Terminal.

3

Execute the following command to add entries to the ARP table for managing IP addresses and corre-
sponding MAC addresses.
arp -s [IP address] [the printer's MAC address you have verified]
Example: arp -s xxx.xxx.xxx.xxx 00-1E-8F-xx-xx-xx

Note

•

In Mac OS when using Terminal, enter the arp command in the format arp -s xxx.xxx.xxx.xxx 00:1E:
8F:xx:xx:xx. For details, refer to the help file for the command line.

4

Execute the following command to send the IP address to the printer and configure it.
ping [IP address as specified in the ARP command] -l 479
Example: ping xxx.xxx.xxx.xxx -l 479

Note

•

In 

-l

, the 

l

 is the letter 

l

.

•

In Mac OS when using Terminal, enter the ping command in the format ping -s 479 xxx.xxx.xxx.xxx. For
details, refer to the help file for the command line.

Note

•

The subnet mask and default gateway are set to 0.0.0.0. Use RemoteUI to change the subnet mask and default
gateway to match your network settings.
For details on RemoteUI, 

see "

Using RemoteUI

."

➔

P.478

Configuring TCP/IPv6 Network Settings

Configuring TCP/IPv6 Network Settings

When printing in a TCP/IPv6 network, you must configure the TCP/IPv6 settings on the Control Panel.
Follow the steps below to configure the TCP/IPv6 network settings.

1

 

On the 

Tab Selection screen

 of the Control Panel, press 

◀

 or 

▶

 to

select the Settings/Adj. tab (

).

Note

•

If the 

Tab Selection screen

 is not displayed, press the 

Menu

 button.

2

Press the 

OK

 button.

The 

Set./Adj. Menu

 is displayed.

3

Press 

▲

 or 

▼

 to select 

Interface Setup

, and then press the 

OK

 button.

4

Press 

▲

 or 

▼

 to select 

TCP/IP

, and then press the 

OK

 button.

 

Configuring TCP/IPv6 Network Settings

                                                                                                                                                                   

iPF840

                                                                                                                                                                                                                     

User's Guide

 

 

Network Setting

Initial Settings

 

482

Summary of Contents for imagePROGRAFi iPF840 series







































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands