manualshive.com logo in svg

Canon imagePROGRAFi iPF840 series, Basic Manual, Page: 80 / 149

Share
Download
Canon imagePROGRAFi iPF840 series Basic Manual Download Page 80

Caution

•

Moving the printer requires at least six people, holding it on both sides. Be careful to avoid back strain
and other injuries.

•

When moving the printer, firmly grasp the Carry-
ing Handles (a) under each side. The printer may
be unsteady if you hold it at other positions,
which poses a risk of injury from dropping the
printer.

a

 

2

 

Remove tape and packaging material attached to the
printer. Also open the Top Cover and remove stoppers
and spacers inside the printer.

3

 

Connect the power cord to the Power Supply Connector
on the back of the printer.

4

Plug the power cord into the outlet.

5

 

Press the power button to turn the printer on.
When the message "

Has printer been reinstalled?

(Do not load ink tanks yet.)

" is displayed, select 

Yes

and press the 

OK

 button.

 

 

 

Reinstalling the Printer

                                                                                                                                                                                 

iPF840 Series

                                                                                                                                                                                                                      

Basic Guide

   

Printer Relocation

Preparing to Transfer the Printer

 

80

Summary of Contents for imagePROGRAFi iPF840 series






















































































































































Reviews:

No comments