manualshive.com logo in svg

Canon imagePROGRAF TX-3100, Online Manual

Share
Download
Canon imagePROGRAF TX-3100 Online Manual Download Page 732

Special Settings dialog box

The 

Special Settings

 dialog box allows you to change the print processing method if you do not get the

print results you want.

Settings Summary

This is a list of items that you can set in the 

Special Settings

 dialog box.

When you click an item that you want to set, the setting contents are displayed outside the box.

Spooling at Printer Driver

Set whether print jobs are to be spooled in the print driver or whether PageComposer processing
is to be performed.
Setting 

No (Use RAW Spooling)

 or 

Yes

 may improve the print results or the printing speed.

Also, depending on the setting, you may not be able to use some of the driver functions.

FineZoom Settings

Use this function to print on long paper.

Yes

The print problem may be corrected.
Select this in usual cases.

No

Image distortions may be corrected (for example, small lines may be eliminated).

Preview Switching

If you check the 

Preview before printing

 check box on the 

Main

 tab and then print,

PageComposer starts.

Application Color Matching Priority

You can assign higher priority to color management by the application software.

Fast Graphic Process

If image colors or line thicknesses are printed incorrectly, you may be able to get the print
results you want by setting this function to off.
This is only displayed when using a 32-bit driver.

Disable the color profile setting of the application software

If the color profile information set in the application software is output to the printer driver,
the printing results may include an unexpected tint. You can resolve the problem in this case
by setting 

Disable the color profile setting of the application software

 to 

On

.

Important

• Even if this is set to 

On

, it will only disable some of the color profile information, and it is

still possible to print using the color profile.
This should normally be set to 

Off

 when using.

Adjust Faint Lines

This function prevents thin lines from fading when printing by darkening light colored lines.

Sharpen Text

Set this to print fine text clearly.

732

Summary of Contents for imagePROGRAF TX-3100




























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands