Canon imagePROGRAF TM-355 Online Manual Download Page 582

Page: 582 / 962

Replacing Ink Tanks

Compatible Ink Tanks

For details on compatible ink tanks, see

Checking the Ink Tank Model Number

Note

• For TM-355/TM-350/TM-255/TM-250/TM-5355/TM-5350/TM-5255/TM-5250, you can replace the ink

tanks with 130 ml or 300 ml ink tanks. You can install different capacity tanks for different colors.

Precautions When Handling Ink Tanks

Take the following precautions when handling ink tanks.

Caution

• For safety, keep ink tanks out of the reach of children.
• If ink is accidentally ingested, contact a physician immediately.

Important

• There may be ink around the ink holes of an ink tank you removed. Handle the ink tanks carefully

during replacement. The ink may stain clothing.

• Do not install ink tanks used in this printer in another printer. This will prevent correct ink level

detection, which may damage the printer or cause other problems.

• We recommend using up an ink tank in the course of printing within six months after breaking the

seal. Printing quality may be affected if you use older ink tanks.

• Do not leave the printer without ink tanks installed for extended periods (a month or more). Residual

ink may become clogged inside the printer and affect printing quality.

How to Replace an Ink Tank

If a message indicates you should replace an ink tank, check the message details and go to step 2.

Selecting Ink Tank Replacement from Menu

2. Removing Ink Tanks

Removing ink tank

3. Loading New Ink Tanks

Loading ink tank

Important

• Do not remove an ink tank during initialization immediately after turning on the printer, or during print

head cleaning. Ink may leak out.

Note

• Ink tank replacement is possible even during printing, when print jobs are being canceled, or when

paper is being advanced.

582

Summary of Contents for imagePROGRAF TM-355



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for imagePROGRAF TM-355

Reviews:

Related manuals for imagePROGRAF TM-355

Brands by name

Popular brands

Canon imagePROGRAF TM-355, Online Manual

Search results

Summary of Contents for imagePROGRAF TM-355

Reviews:

Related manuals for imagePROGRAF TM-355

Brands by name

Popular brands