Canon imagePROGRAF TM-200 Online Manual Download Page 188

Page: 188 / 930

Cut to standard size

Specifies standard size as the output page size when printing on roll paper.

This setting item is displayed by tapping in the following order.

(

Setup

) >

Device settings

Print settings

HP-GL/2 print settings

Paper settings

•

Cuts to standard size in accordance with the roll paper width.

When there are two lengths/widths applicable for a given roll paper width, the optimum size is selected
automatically.

Note

• If

is selected for

Conserve paper

and there is blank space above/below the image, the size will

not be standard size.

• When

is selected for

Print centered

, printing will be in the center of the standard size.

• If there is no standard size corresponding to the roll paper width, operation is the same as if

OFF

selected. No message is displayed.

• For information about supported standard sizes, see

Standard Size Table

•

OFF (Initial setting)

Cutting according to standard size is not performed.

STANDARD CUT EXAMPLES

• A3-size width roll paper

A. Position of cut when

OFF

B. Position of cut when

• A3-size width roll paper

188

Summary of Contents for imagePROGRAF TM-200



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for imagePROGRAF TM-200

Reviews:

Related manuals for imagePROGRAF TM-200

Brands by name

Popular brands

Canon imagePROGRAF TM-200, Online Manual

Search results

Summary of Contents for imagePROGRAF TM-200

Reviews:

Related manuals for imagePROGRAF TM-200

Brands by name

Popular brands