Canon imagePROGRAF PRO-6600, Online Manual

Page: 436 / 939

Setting Mail Server
To use mail function, specify the mail server settings.
*This function may not be available depending on the country or region of purchase.
Note
• If you did not specify the time zone setting using the printer's operation panel, a message to inform you •
that the correct time may not be reflected on the sent e-mail appears. We recommend that you set the
time zone setting using the printer's operation panel.
Other printer settings
• These functions can be set only when you are logged in administrator mode. •
1. Launch the remote UI. 1.
Start up Remote UI
2. Select Printer settings . 2.
3. Select Set mail server . 3.
4. Specify mail server settings. 4.
Specify the following items.
• Sender address •
Enter the e-mail address of the sender (this printer).
• Outgoing mail server (SMTP) •
Enter the address of your SMTP server.
• Port number (SMTP) •
Enter the port number of your SMTP server.
• Secure connection (SSL) •
Select if you use the secure connection (SSL).
• Don't verify certificates •
Select if you do not verify the certificate.
• Authentication •
Select one of the following authentication methods.
◦ SMTP authentication ◦
Select if you send e-mail with SMTP authentication.
Next, you can specify the following settings.
▪ Outgoing account ▪
Enter the account name for sending to perform the authentication.
▪ Outgoing password ▪
436