Canon imagePROGRAF PRO-6600, Online Manual

Page: 336 / 939

Paper Sizes
Rolls
Rolls that meet the following conditions are supported.
• Outer diameter is 6.7 inches (170 mm) or less •
• Inner diameter of paper core: 2 or 3 inches •
• Printing side out •
Roll Paper Width PRO-6600 / PRO-566 : 60.00 in. (1524.0 mm) to 6.00 in. (152.4 mm)
PRO-4600 / PRO-546 : 44.02 in. (1118.0 mm) to 6.00 in. (152.4 mm)
PRO-2600 / PRO-526 : 24.02 in. (610.0 mm) to 6.00 in. (152.4 mm)
Roll Paper Width recommended
for borderless printing(*1,*2) 60 in Roll (1524.0mm)
54 in Roll (1371.6mm)
50 in Roll (1270.0mm)
44 in Roll (1117.6mm)
42 in Roll (1066.8mm)
B0/B1 Roll (1030.0mm)
36 in Roll (914.4mm)
A0/A1 Roll (841.0mm)
B1/B2 Roll (728.0mm)
24 in Roll (609.6mm)
A1/A2 Roll (594.0mm)
B2/B3 Roll (515.0mm)
17 in Roll (431.8mm)
14 in Roll (355.6mm)
10 in Roll (254.0mm)
Minimum Paper Length 4.00 in. (101.6 mm)
Excludes cloth/canvas paper.
Maximum Printable Length 59 feet (18 m)
depends on the OS and application.
Thickness 3 mil (0.07 mm) to 31 mil (0.8 mm)
*1:Borderless printing may not be available depending on the media type. For details on media types that
can be used for borderless printing, see "Paper Information List."
*2:You can perform borderless printing without specifying
Roll Paper Width recommended for it. As
opposed to standard borderless printing, there will be a small margin on the left and right because the
paper width is set a little bit smaller than the width of the document.
336