Canon imagePROGRAF iPF8400, Service Manual

Page: 279 / 308

Chapter 8
8-1
8.1 Outline
8.1.1 Outline
0023-3204
The printer indicates errors using the display and LEDs.
If an error occurs during printing, the printer status is also displayed on the status monitor of the printer driver.
The following three types of errors are displayed on the display:
- Warning
Status where the print operation can be continued without remedying the cause of the problem. This can, however, adversely affect the printing results.
- Error
Status where the print operation is stopped, and the regular operation cannot be recovered until the cause of the problem is remedied.
- Service call error
When a service call error occurs, the error is not cleared and the error indication remains on the operation panel even if the printer is powered off and on again.
(Occurrence of the service call error is indicated again at power-on.)
This measure is taken to prevent user's recovery of the service call error and damages to the printer.
Service call errors can be cleared, however, by starting up the printer in the service mode.
Note that some of the warnings, errors, and service call error described in the following tables may not appear in this printer.
In addition, the message that appears on the screen may not be the same as what is described in the table.
The first 4 digits of Warning and Error code show the following description.
The first 2 digits of code Description
01xxxxxx-xxx Warning
03xxxxxx-xxx Error
The next 2 digits of code Description
xx01xxxx-xxxx Jam-related
xx03xxxx-xxxx Cover-related
xx06xxxx-xxxx Media-related
xx13xxxx-xxxx Controller-related
xx1Axxxx-xxxx HDD-related
xx32xxxx-xxxx Media-related
xx34xxxx-xxxx PDL-related
xx80xxxx-xxxx Printhead-related
xx81xxxx-xxxx Inktank-related
xx83xxxx-xxxx Inktank-related
xx84xxxx-xxxx Maintenance cartridge-related
xx86xxxx-xxxx Print-related
xx87xxxx-xxxx Cutter-related
xx89xxxx-xxxx Media take-up unit-related
xx90xxxx-xxxx Version up-related