7.
Select and click a roll paper in the
L
Paper Source
list.
8.
Select the width of the loaded roll in the
M
Roll Paper Width
list—in this case,
ISO A2/A3 Roll (420.0mm)
.
9.
In the
A
Page Size
list, click the size of the original as specified in the application. In this case, click
ISO A4
.
10.
Select the
C
Enlarged/Reduced Printing
check box.
11.
Click
ISO A4
in the
G
Paper Size
list.
12.
Click
F
Scaling
and enter
120
.
Note
•
You can specify enlargement that exceeds the paper size, but in this case, the portions off the bottom
and right edges of the paper will not be printed.
•
If the original size after enlargement or reduction is smaller than the paper size, the original is printed
in the upper-left corner. In this case, you can center originals by selecting
E
Print Centered
on the
Layout
sheet.
13.
Confirm the print settings and print as desired.
Note
•
For tips on confirming print settings, see "
Confirming Print Settings (Windows)
"
Resizing Originals by Entering a Scaling Value (Mac OS X)
This topic describes how to enlarge originals before printing by entering a scaling value, based on the following example.
•
Document: Any Type
Enhanced Printing Options
>
Printing enlargements or reductions
>
Resizing Originals by Entering a Scaling Value (Mac OS X)
iPF8300
3
76