manualshive.com logo in svg

Canon imagePROGRAF iPF8300, User Manual, Page: 870 / 1150

Share
Download
Canon imagePROGRAF iPF8300 User Manual Download Page 870

6.

Press 

▲

 or 

▼

 to select 

Adjust Length

, and then press the 

OK

 button.

7.

Press 

▲

 or 

▼

 to select 

AdjustmentPrint

 or 

Change Settings

, and then press the 

OK

 button.

When you select 

AdjustmentPrint

, a test pattern is printed for you to measure the scale and calculate the discrepan-

cy. The scale bar shows 

Millimeter

 in 50 mm units and 

Inch

 in 1 inch units.

Note

•

A test pattern is printed in black when you choose 

A:High

 or in magenta if you choose 

B:Standard/

Draft

.

•

To  cancel  printing  the  test  pattern  for  adjustment,  hold  down  the 

Stop

  button.  When  "

Stop  print-

ing?

" is displayed, press 

▲

 or 

▼

 to select "

Yes

", and then press the 

OK

 button.

8.

Press 

▲

 or 

▼

 to enter the amount of discrepancy, and then press the 

OK

 button.

If the scale is shorter than the actual size, use a positive setting value. If it is longer, use a negative value.
The feed amount can be adjusted in 0.02% increments.

Adjusting the Vacuum Strength (VacuumStrngth)

When printing on heavyweight paper or paper that curls or wrinkles easily, if the Printhead rubs against paper, adjusting the
level of suction against paper on the Platen may improve results.

Important

•

Paper rubbing against or becoming caught on the Printhead may jam or result in printed documents that are
soiled.

1.

On the 

Tab Selection screen

 of the Control Panel, press 

◀

 or 

▶

 to select the Paper tab (

).

Note

•

If the 

Tab Selection screen

 is not displayed, press the 

Menu

 button.

2.

Press the 

OK

 button.

The 

Paper Menu

 is displayed.

3.

Press 

▲

 or 

▼

 to select 

Paper Details

, and then press the 

OK

 button.

Adjustments for Better Print Quality 

>

 Adjusting the feed amount 

>

Adjusting the Vacuum Strength (VacuumStrngth)

iPF8300

8

852

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for imagePROGRAF iPF8300































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments