manualshive.com logo in svg

Canon imagePROGRAF iPF8300, User Manual, Page: 866 / 1150

Share
Download
Canon imagePROGRAF iPF8300 User Manual Download Page 866

4.

Press 

▲

 or 

▼

 to select 

Adjust Printer

, and then press the 

OK

 button.

5.

Press 

▲

 or 

▼

 to select 

Feed Priority

, and then press the 

OK

 button.

6.

Press 

▲

 or 

▼

 to select 

Adj. Quality

, and then press the 

OK

 button.

7.

Press 

▲

 or 

▼

 to select 

Auto(GenuinePpr)

 or 

Auto(OtherPaper)

, and then press the 

OK

 button.

A test pattern is printed for adjustment.
Adjustment is now finished if you have printed on a roll or a sheet of A2 size or larger.

8.

If you are printing on sheets smaller than A2 size for 

Auto(OtherPaper)

, a confirmation message is shown on the

Display Screen requesting you to continue printing.
Press the 

OK

 button and follow the instructions on the Display Screen.

Manual Banding Adjustment (Adj. Quality)

If printed images are affected by banding in different colors, execute 

Adj. Quality

 for adjustment of the paper feed amount.

Use 

Manual

 adjustment with highly transparent media or other paper for which 

Auto(GenuinePpr)

 or 

Auto(OtherPaper)

cannot be used.

 (See "

Automatic Banding Adjustment (Adj. Quality)

.")

→P.846

Manual

 adjustment requires you to enter an adjustment value after a test pattern is printed.

Note

•

Always check the 

Adj. Priority

 values before using 

Manual

 adjustment.

 (See "

Selecting a Feed Amount Adjustment Method (Feed Priority)

.")

→P.845

•

If additional fine-tuning is necessary after 

Manual

 adjustment, use 

Adj. Fine Feed

 (See "

Fine-Tuning the Paper Feed Amount (Adj. Fine Feed)

.")

→P.850

•

Use 

Adjust Length

 to ensure that lines in CAD drawings are printed at exactly the right length.

 (See "

Adjusting Line Length (Adjust Length)

.")

→P.850

•

Use paper of the same type and size for adjustment as you will use for printing.

Paper to Prepare

Rolls

An unused roll at least 10 inches wide

Sheets

Two sheets of unused paper of at least A4/Letter size

Perform adjustment as follows.

1.

Load the paper.

•

Attaching the Roll Holder to Rolls

→P.774

•

Loading Rolls in the Printer

→P.777

•

Loading Sheets in the Printer

→P.802

Note

•

Always make sure the loaded paper matches the type of paper specified. Adjustment cannot be com-
pleted correctly unless the loaded paper matches the settings.

Adjustments for Better Print Quality 

>

 Adjusting the feed amount 

>

Manual Banding Adjustment (Adj. Quality)

iPF8300

8

848

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for imagePROGRAF iPF8300































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments