Cannot feed paper.
Cause
Corrective Action
A paper jam oc-
curred in the print-
er during printing.
1.
Lift the Release Lever and remove the jammed paper.
2.
Load paper.
3.
Lower the Release Lever.
4.
If "
Not finished printing. Finish printing remaining jobs?
" is shown on the Display Screen,
press the
OK
button.
Printing will resume, starting from the page on which the error occurred.
Cannot cut paper.
Cause
Corrective Action
There are sheets left on the
Ejection Guide.
1.
Lift the Release Lever and remove the paper.
2.
Load paper.
3.
Lower the Release Lever.
4.
If "
Not finished printing. Finish printing remaining jobs?
" is shown on the Dis-
play Screen, press the
OK
button.
Printing will resume, starting from the page on which the error occurred.
There is a foreign object by
the Output Tray, obstruct-
ing the Cutter Unit.
1.
Lift the Top Cover and remove the foreign object.
2.
If "
Not finished printing. Finish printing remaining jobs?
" is shown on the Dis-
play Screen, press the
OK
button.
Printing will resume, starting from the page on which the error occurred.
You are not using the print-
er under the recommended
environmental conditions
for the paper.
Use the printer only where the recommended environmental conditions for the paper are
met. Note that various environmental conditions are recommended for various types of
paper. For details on the recommended environmental conditions, see the Paper Refer-
ence Guide.
You are using paper that is
not compatible with auto-
matic cutting.
1.
Specify
Manual
as the cutting method and use scissors or a cutting tool to cut the
roll.
Specifying the Cutting Method for Rolls
For information about paper that is compatible with automatic cutting, see the Paper
Reference Guide.
2.
Lift the Release Lever and remove the paper.
In other cases, the Cutter
Unit may be damaged.
Contact your Canon dealer for assistance.
Error Message
>
Messages regarding paper
>
Cannot feed paper.
iPF8300
13
1090
