manualshive.com logo in svg

Canon imagePROGRAF iPF8300, User Manual

Share
Download
Canon imagePROGRAF iPF8300 User Manual Download Page 1107

Paper loaded askew.

Cause

Corrective Action

Paper loaded crooked was detected when the paper was advanced.

Follow these steps to reload the roll.

1.

Lift the Release Lever.

2.

Adjust  the  right  edge  of  the  roll  to  make  it
parallel to the orange Paper Alignment Line.

3.

Lower the Release Lever.

 (See "

Loading Rolls in the Printer

.")

→P.777

If this error recurs after you reload the roll, re-
move the Roll Holder from the printer, push the
roll firmly in until it touches the Roll Holder
flange, and reload the Roll Holder in the printer.

 (See "

Attaching the Roll Holder to Rolls

.")

→P.774

Follow these steps to reload the sheet.

1.

Lift the Release Lever.

2.

Pull out the sheet.

3.

Lower the Release Lever.

4.

Adjust the right edge of the sheet to make it
parallel to the right Paper Alignment Line and
the trailing edge of the sheet to make it paral-
lel  to  the  paper  alignment  line  under  the  Pa-
per Retainer.

 (See "

Loading Sheets in the Printer

.")

→P.802

Note

•

To disable this message (if it is displayed repeatedly despite reloading paper, for example), choose 

Off

 or

Loose

 in the 

Skew Check Lv.

 setting of the printer menu. However, this may cause jams and printing prob-

lems because paper may be askew when printed. Also, the Platen may become soiled, which may soil the
back of the next document when it is printed.

Cannot detect papr

Cause

Corrective Action

The printer could not detect the paper.

Reload the paper as follows.

1.

Press the 

OK

 button and remove the paper.

2.

Reload the paper.

 (See "

Loading Sheets in the Printer

.")

→P.802

 (See "

Loading Rolls in the Printer

.")

→P.777

Error Message 

>

 Messages regarding paper 

>

iPF8300

Paper loaded askew.

13

1089

Downloaded from ManualsPrinter.com Manuals

Summary of Contents for imagePROGRAF iPF8300































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands