Canon imageprograf iPF685, User Manual

Page: 138 / 642

3
Click the Page Setup tab to display the Page Setup
sheet.
4
Select and click a roll paper in the
L
Paper Source list.
5
Click
N
Roll Paper Options to display the Roll Paper Op-
tions dialog box.
6
To enable automatic cutting, click Yes in the
A
Automatic Cutting list. If you prefer to cut the paper later
yourself, click Print Cut Guideline .
7
Click OK to close the Roll Paper Options dialog box.
8
Confirm the print settings and print as desired.
Note
•
For tips on confirming print settings,
see "
Confirming Print Settings
."
➔
P.145
Roll paper will be automatically cut after printing.
Cutting Roll Paper After Printing (Mac OS)
Cutting Roll Paper After Printing (Mac OS)
This topic describes how to cut roll paper automatically after printing (using the auto cut function), as well as how to
print a cut line for manual cutting.
Note
•
The auto cut function is activated on the printer by default and when the printer driver is installed. Follow the steps
below to reactivate the function if it is disabled, or to select the setting for printing a cut line instead.
Cutting Roll Paper After Printing (Mac OS) iPF685
User's Guide
Enhanced Printing Options
Other useful settings
138