Canon imagePROGRAF iPF6300S, User Manual

Page: 940 / 1126

Setting Item Description, Instructions
System
Setup Paper
Size
Basis
Roll Selection 2 If roll size detection is activated, choose whether
10in. (254mm) or JIS B4 (257mm) is applied when a
roll of an intermediate width is detected.
Keep Paper Size Choose On to use the paper size setting as the basis
for printing instead of other settings. The margin set-
ting of the printer menu will be used instead of the
margin setting of the printer driver if the latter is
smaller, which may prevent text or images in the mar-
gin from being printed.
Choose Off to give priority to margin settings. The
larger value is used if the margin specified in the
printer driver does not match the margin in the printer
menu.
TrimEdge Reload Specify whether to trim the leading edge of the cur-
rently retracted roll when the roll is advanced. Cut the
edge if you are concerned about any marks left on the
roll when the roll is left in the retracted position.
Specify
On to have rolls cut when printing begins af-
ter Sleep mode or when the power is restored. Select-
ing
Automatic will trim the edge when the roll has
been in the retracted position for two days or more.
Rep.P.head Print Choose On to have the printer automatically execute
the Advanced Adj. operations after you replace the
Printhead. (See " Automatic Adjustment to Straight-
en Lines and Colors (Head Posi. Adj.) .")
→P.827
Nozzle Check In Frequency , specify the timing for automatic
checks of nozzle clogging. Choose Standard to have
the printer adjust the timing for checks based on the
frequency of nozzle use. Choose
1 page to check once
per page.
Select
Warning > On to display warnings if the noz-
zles clog during printing.
Use RemoteUI Choosing Off prohibits access from RemoteUI. Set-
tings can only be configured from the control panel.
Control Panel > Printer Menu >
Menu Settings iPF6300S
9
922