Canon imagePROGRAF iPF6300S, User Manual

Page: 1029 / 1126

Frequently Asked Questions
Frequently Asked Questions .........................................................................................................................
1011
Frequently Asked Questions
This section presents frequently asked questions and answers. To view more detailed explanations, click the hyperlinks in
the answer column.
Question Answer
I want to easily create
vertical or horizontal
banners. You can print originals that are in landscape (or portrait) orientation automatically enlarged
to fit the roll width. This is an easy way to create vertical or horizontal banners.
⇒
" Printing Vertical or Horizontal Banners (Large-Format Printing)
→P.122
"
A replacement mes-
sage for the Mainte-
nance Cartridge was
displayed. If a replacement message for the Maintenance Cartridge is displayed, replace it with a new
Maintenance Cartridge.
⇒
" When to Replace the Maintenance Cartridge
→P.997
"
I want to perform en-
largement copying
from a
Color image-
RUNNER .
By using Color imageRUNNER Enlargement Copy (iR enlargement copy), you can print en-
largements of scanned originals from a
Color imageRUNNER .
⇒
"
Printing Enlargements of Scanned Originals from a Color imageRUNNER
→P.304
"
⇒
" Printing Enlargements of Scanned Originals from a Color imageRUNNER
→P.604
"
I want to tilt and trans-
fer the printer. Avoid tilting the printer excessively in transit. This may cause ink in the printer to leak and
cause stains. If it is necessary to tilt the printer in transit, contact your Canon dealer.
⇒
" Preparing to Transfer the Printer
→P.1003
"
I want to know the
time to replace the Ink
Tank. Normally, replace it when an Ink Tank replacement message is displayed.
Ink Tank replacement is possible even when print jobs are being canceled, or when paper is
being advanced.
⇒
" When to Replace Ink Tanks
→P.979
"
Does this printer sup-
port sub-ink tank sys-
tem? This printer does not support sub-ink tank system.
Thus, the ink tank cannot be replaced during printing.
⇒
"
Replacing Ink Tanks
→P.972
"
I want to know how to
configure roll cutting. You can select the cutting method by the setting of the printer driver and the setting of the
printer.
To cut rolls automatically after printing, set
Cutting Mode of the printer to Automatic and
Automatic Cutting of the printer driver to Yes .
When using paper for which ink adhesion takes time or the print surface is easily scratched,
we recommend that you set the
Cutting Mode setting of the printer to Eject .
⇒
" Specifying the Cutting Method for Rolls
→P.797
"
⇒
"
Cutting Roll Paper After Printing
→P.196
"
I want to configure so
that the roll is cut auto-
matically after waiting
for the ink to dry. In the printer driver, you can set the time for waiting until the ink dries.
Also, you can set likewise on the printer.
⇒
" Specifying the Ink Drying Time for Rolls
→P.795
"
⇒
" Menu Structure
→P.904
"
I want to replace the
Printhead myself. Acquire a Printhead supported by the printer. You can replace it yourself.
⇒
"
Replacing the Printhead
→P.982
"
How do I print without
borders? When printing on rolls, you can perform borderless printing by configuring the printer driver.
(when printing on cut sheets, you cannot perform borderless printing)
⇒
" Borderless Printing on Paper of Equivalent Size
→P.107
"
⇒
" Borderless Printing by Resizing Originals to Fit the Roll Width
→P.114
"
⇒
" Borderless Printing at Actual Size
→P.99
"
Troubleshooting > Frequently Asked Questions >
iPF6300S Frequently Asked Questions
12
1011