Canon imagePRESS Server B5000, Configuration And Setup

Page: 98 / 128

Print the Configuration page
The Configuration page lists the settings currently used by the imagePRESS Server.
After you set up the imagePRESS Server, print the Configuration page to confirm your settings. Post the current
Configuration page near the imagePRESS Server for quick reference. Users need the information on this page, such
as the current printer default settings.
You can print the Configuration page the following ways:
•
In Command WorkStation, click
File
>
Print
>
Server Configuration
.
•
On the printer control panel, press the
Main Menu
button.
Press
Show All
, if needed.
Press the
Fiery
logo, then press
Info
>
Print Pages
>
Configuration
.
System Updates
With System Updates, you can schedule updates to imagePRESS Server system and user software.
Schedule automatic updates when the imagePRESS Server is not in use. While the updates are being installed, you
cannot print to the imagePRESS Server. It may need to reboot several times.
Check Now
The Check Now feature in System Updates allows you to view or install available updates between scheduled system
updates, or view a list of previously installed updates.
To access Check Now, you must use the Fiery Advanced Controller Interface (FACI) or establish a remote
connection to the imagePRESS Server (see Remote Desktop on page 107).
Check Now is not available from Command WorkStation or WebTools.
Firewalls
If the imagePRESS Server is behind a firewall and Internet access is not an option, the site administrator can
configure a proxy server at the customer site to allow the imagePRESS Server to receive system updates.
User software
User software applications are first downloaded from the Update Server to a partition on the imagePRESS Server
hard disk drive. Users access the imagePRESS Server over the Internet and download the applications onto client
computers and then manually install them.
Configuration and Setup
Administration
98