Canon imagePRESS Server B5000 Configuration And Setup Download Page 85

Page: 85 / 128

WebTools

WebTools allows you to manage the imagePRESS Server remotely from the Internet or your company’s intranet.

Once enabled, you can access WebTools from a network computer. Make sure that the network setup options are

correct for your environment.
The imagePRESS Server supports Internet or intranet access with WebTools from Windows and Mac OS

computers.

Note:

WebTools can be used with HTTP or HTTPS. If the protocol is HTTP, WebTools redirects the access to

HTTPS.

Home

Home

provides you with current information about installed options and

the jobs processing and printing on the imagePRESS Server. You do not

need a password to use this feature. For more information, see

Utilities

Downloads

Downloads

allows users to download installers for printer drivers and other

software directly from the imagePRESS Server. You do not need a password

to use this feature. For more information, see

Printing

and

Utilities

Docs

Docs

allows users to access, manage, and modify jobs in their mailboxes on

the imagePRESS Server, and submit jobs to the imagePRESS Server. You do

not need a password to use this feature.

Configure

Configure

allows you to view and modify imagePRESS Server options from a

network computer. You need an Administrator password to use this feature.

For more information, see

Utilities

and

Command WorkStation Help

Enable WebTools

To use WebTools, you must have TCP/IP enabled and a supported Internet browser.

•

On each client computer, do the following:

Enable TCP/IP networking.

Assign a valid, unique IP address, subnet mask, and gateway address, if required.

Make sure that a supported Internet browser is installed.

Configuration and Setup

WebTools

Summary of Contents for imagePRESS Server B5000

































































































































Search results

Summary of Contents for imagePRESS Server B5000

Reviews:

Related manuals for imagePRESS Server B5000

Brands by name

Popular brands

Canon imagePRESS Server B5000, Configuration And Setup

Search results

Summary of Contents for imagePRESS Server B5000

Reviews:

Related manuals for imagePRESS Server B5000

Brands by name

Popular brands