Network setup options
To access
Network
setup options from the printer control panel, press the
Main Menu
button, press
Show All
, then
press
Fiery
>
Tools
>
Setup
>
Network
.
For more information, see
Access Setup from the printer control panel
on page 35.
Port
The following setup options are available in the
Port
group.
Ethernet
Ethernet Speed
Choose the appropriate speed of the network.
Choose
Auto
in any of these cases:
•
The network speed is unknown.
•
The network environment is mixed.
•
The network uses 1 Gbps.
Settings:
10 Mbps Half-Duplex
100 Mbps Half-Duplex
Auto
(default)
10 Mbps Full-Duplex
100 Mbps Full-Duplex
802.1x
The imagePRESS Server can seek authentication from an 802.1x authentication server (such as a RADIUS server),
often through an intermediate access point (an authenticator).
The imagePRESS Server seeks this authentication at startup, or when the Ethernet cable is disconnected and
reconnected. If the imagePRESS Server is successfully authenticated, it is allowed access to the network.
Enable 802.1x Authentication
Select to allow the imagePRESS Server to seek authentication from an 802.1x authentication server.
Settings:
On
Configuration and Setup
Setting up from the printer control panel
43
Summary of Contents for imagePRESS Server B5000
Page 8: ...Configuration and Setup Contents 8 ...
Page 124: ...Configuration and Setup Troubleshooting 124 ...
Page 127: ......
