Canon IMAGEPRESS C7010VPS Operating Information Manual Download Page 324

Page: 324 / 388

Restore the factory default workflow

Introduction

You can restore the factory default automated workflow. This has the following conse-
quences.

■

All the automated workflows you added will be removed

■

All the changes in the default workflow will be lost.

How to restore the factory default workflow

Go to 'Preferences' -> 'Automated workflows'.

Click the 'Restore' button.
The factory default automated workflow is restored.

■

Introduction to automated workflows, on page 319

■

Add an automated workflow, on page 321

■

Edit an automated workflow, on page 322

■

Delete an automated workflow, on page 323

Chapter 10 - Adapt printer settings to your needs

324

Restore the factory default workflow

Summary of Contents for IMAGEPRESS C7010VPS





































































































































































































































































































































































































Search results

Summary of Contents for IMAGEPRESS C7010VPS

Reviews:

Canon IMAGEPRESS C7010VPS, Operating Information Manual, Page: 324 / 388

Search results

Summary of Contents for IMAGEPRESS C7010VPS

Reviews: