Finished sizes of booklets
Introduction
This machine can bind various sizes of booklets.
The sizes of the finished booklets differ according to the cutting method. The following
table shows relations between sizes of the finished booklets and sizes of cover and body
pages / slip sheets.
Be sure to confirm the cutting range is within the available ranges shown below.
Top/bottom cutting range is the total of top cutting range and bottom cutting range.
therefore, half the value of top/bottom cutting range is equal to each value of the top
range and the bottom range.
Top/bottom cutting range (C1): 13 to 79 mm (0.52" to 3.11")
Foredge cutting range (C2): 6.5 to 49.5 mm (0.26" to 1.94")
Booklet thickness (D): less than 25 mm (1")
Cutting method and paper size
#
Size of cover
Size of body
pages / slip sheets
Size of finished
booklet
Cutting method
Length:
L2
Width:
W2
Length:
L1
Width:
W1
Length:
L
Width:
W
*1
364.0 to
L1 x 2 +
30.5 mm
*3
W + C1
L + C2
W + C1
*2
138 to
216
mm
203 to
297
mm
3-direction cut-
ting (top, bottom,
foredge cutting)
364.0 to
L1 x 2 +
30.5 mm
*3
W mm
L + C2
W mm
138 to
216
mm
257
[B5] to
297
mm
1-direction cut-
ting (foredge cut-
ting)
364.0 to
L1 x 2 +
30.5 mm
*3
W mm
L mm
W mm
182
[B5] to
216
mm
257
[B5] to
297
mm
No cutting
Chapter 3 - Basic operations
42
Finished sizes of booklets
Summary of Contents for imagePRESS C7010VPS/C6010VPS/C6010S Series
