manualshive.com logo in svg

Canon imagePRESS C1+, Reference Manual, Page: 93 / 622

Share
Download
Canon imagePRESS C1+ Reference Manual Download Page 93

Using the Touch Panel Display

2-21

2

Basic Oper

ations

Using the Touch Panel Display

This section describes the keys that are frequently used on the touch panel display. Information 
on how to adjust the brightness of the touch panel display is also provided.

CAUTION

 

Press the touch panel display keys gently with your fingers or the edit pen. Do not press the 
touch panel display with a pencil, ballpoint pen, or other sharp objects that can scratch the 
surface of the touch panel display or break it.

NOTE

 

Before using the touch panel display, peel off the protective film from the display. 

 

Frequently Used Keys

The following keys on the touch panel display are used frequently:

Press to cancel the mode that you are currently setting, or a mode that has already 
been set, on screens other than the Additional Functions screen. Also, press to close 
the current mode's setting screen, and keep the original settings set from the 
Additional Functions screen.

Press to confirm the current settings and proceed to the next step in the procedure.

Press to go back to the previous step in the procedure, without saving the current 
settings.

Press to close the current screen.

Press to confirm the current settings of a mode.

Summary of Contents for imagePRESS C1+















































































































































































































































































































































































































































































































































































































































Reviews:

No comments