Canon imagePRESS C1+, Reference Manual, Page: 82 / 622

Overview of the imagePRESS C1+ 2-10
2
Basic Oper
ations
NOTE
•
Settings made from the Additional Functions screen are not changed even if you press .
•
For instructions on customizing settings, see Chapter 4, "Customizing Settings."
•
For instructions on specifying System Settings, see Chapter 6, "System Manager Settings."
•
<Copy Settings> appears only if the optional Color Image Reader-H1 is installed.
•
For instructions on specifying Printer Settings, see the PS/PCL/UFR II Printer Guide.
•
For instructions on specifying Network Settings, see the Network Guide.
•
[Communications Settings] and [Address Book Settings] are displayed on the Additional Functions
screen only if the optional Color Universal Send Kit is activated.
•
[Communications Settings], [Forwarding Settings], [Restrict the Send Function], and [Register LDAP
Server] are displayed on the System Settings screen only if the optional Color Universal Send Kit is
activated.
•
[Auto Online/Offline] appears only if the optional Color UFR II/PCL/PS Printer Kit or imagePRESS
Server is vailable for use.
Functions That Conserve Power
You can conserve power efficiently when the machine is not being used by using the following
modes.
IMPORTANT
Even if the main power switch is turned OFF, a small amount of energy is consumed if the power plug is
left inserted into the power outlet. If you do not want any energy consumed, remove the power plug from
the power outlet.
NOTE
•
The touch panel display turns OFF when the machine enters one of the energy saving modes (other
than the Quiet mode).
•
The machine can continue to receive I-fax documents, and process or print data sent from computers
even if it is in one of the energy saving modes described below.
■
Energy Saver Mode
The Energy Saver mode conserves energy by lowering the temperature of the fixing unit when the
machine is not used for a prolonged period of time. You can set the machine to enter the Energy Saver
mode by pressing
on the control panel. To reactivate the machine, press again. You can also press
the control panel power switch to reactivate the machine.
NOTE
•
The Energy Saver mode's energy conservation level can be set to '-10%', '-25%', '-50%', or 'None'. (See
"Energy Saver Mode," on p. 4-37.)
•
When the Energy Saver mode is set to '-50%', the energy conservation level is same as the Low-Power
mode.