manualshive.com logo in svg

Canon imagePRESS C1+, Reference Manual, Page: 489 / 622

Share
Download
Canon imagePRESS C1+ Reference Manual Download Page 489

Routine Cleaning

7-55

7

Rout

ine

 Main

te

nan

ce

CAUTION

 

Do not dampen the cloth too much, as this may damage the original or break the 
machine.

NOTE

 

Since the touch panel display becomes dirty from normal use, we recommend that you clean it 
once a week or every 10 days.

 

Automatic Feeder Cleaning

If your originals have black streaks or appear dirty after scanning them through the feeder, clean 
the rollers of the feeder.

NOTE

 

It takes approximately 15 seconds to clean the feeder.

1

Press  

➞

 [Adjustment/Cleaning] 

➞

 [Feeder Cleaning].

2

Place 10 sheets of blank paper into the feeder 

➞

 press [Start].

Make sure that you fan the sheets of paper well.

Use A4 paper (60 to 80 g/m

2

).

When cleaning is complete, try scanning again.

NOTE

 

To cancel feeder cleaning while it is in progress, press [Cancel].

Summary of Contents for imagePRESS C1+















































































































































































































































































































































































































































































































































































































































Reviews:

No comments