Canon imagePRESS C1+, Reference Manual, Page: 414 / 622

Registering/Editing Custom Paper Types 6-130
6
Syste
m
Man
age
r Set
ti
ngs
■
Printing Area (a x b)
The printing area is shown by "a" and "b" on the test print paper. When the setting is correct, the length
of "a" is 360.0 mm and the length of "b" is 270.0 mm.
NOTE
If you perform a test print using paper smaller than 287 mm x 393 mm, you will not be able to measure
the length of a and b since the entire image cannot be printed on the paper.
Lead Edge Alignment Adjustment
This setting enables you to adjust the image location, by checking whether the register marks
on the test print align with the image at the leading edge toward the feeding direction of the test
print paper.
1
Press
➞
[System Settings]
➞
[Paper Type Management Settings].
a
b
An Example of the Test Print Lacking an Image