Canon imagePRESS C1+, Reference Manual, Page: 412 / 622

Registering/Editing Custom Paper Types 6-128
6
Syste
m
Man
age
r Set
ti
ngs
Test Print Paper
The test print paper used when you adjust the location of the image is described below. The
following shows the test print paper which printed on A3 paper.
The side printed "1" on it is the front side. The side with nothing printed on it is the back side.
The arrow printed in the centre of the test print paper indicates the feeding direction.
■
Register Mark
•
You can adjust the image location of the lead edge toward the feeding direction by aligning it with the
"A3" register mark. (If you are printing on an 11" x 17" paper, align the image location of the lead edge
with the "L3" register mark.)
•
You can adjust the image location of the left edge toward the feeding direction by aligning it with the
"A1" register mark. (If you are printing on an 11" x 17" paper, align the image location of the left edge
with the "L1" register mark.)
Feeding Direction
Lead
Edge
(A3)
Left
Edge (A1)
Left
Edge (A2)
Register
Marks