manualshive.com logo in svg

Canon imagePRESS C1+, Reference Manual, Page: 376 / 622

Share
Download
Canon imagePRESS C1+ Reference Manual Download Page 376

Device Management Settings

6-92

6

Syste

m

 Man

age

r Set

ti

ngs

 

Exposure Recalibration When Scanning

When the optional Feeder (DADF-R1) is attached, scanning a curled original that is placed on 
the platen glass may result in density unevenness on the left and right edges. This is because 
the original is not placed flat on the platen glass. This may be improved by adjusting the density 
level (up to approximately 20 mm) of the left and right edges of the paper.

IMPORTANT

 

[Exposure Recalibration when Scanning] is displayed only if the settings are made available by your 
local authorized Canon dealer. Even if [Exposure Recalibration when Scanning] is displayed, do not 
allow anyone to change the settings except for the system manager. For more information on changing 
the settings, contact your local authorized Canon dealer.

1

Press  

➞

 [System Settings] 

➞

 [Device Management Settings] 

➞

 

[Exposure Recalibration when Scanning].

2

Press [-] or [+] under <Left Edge> or <Right Edge> to set the exposure 
recalibration.

Paper

(A3 or 11" x 17")

Density Unevenness

Right Edge

Left Edge

Summary of Contents for imagePRESS C1+















































































































































































































































































































































































































































































































































































































































Reviews:

No comments