manualshive.com logo in svg

Canon imagePRESS C1+, Reference Manual, Page: 339 / 622

Share
Download
Canon imagePRESS C1+ Reference Manual Download Page 339

Specifying Device Information Delivery Settings

6-55

6

Syste

m

 Man

age

r Set

ti

ngs

2

Select the information to restore 

➞

 press [Start].

IMPORTANT

 

•

If you do not restore the Additional Functions settings and the Address Book at the same time, 
the URL Send Settings in Mail Box Settings (from the Additional Functions screen) may be 
erased.

•

You cannot restore the settings made in iW Function Flow (optional) to what they were before the 
device information was updated.

3

Press [Yes].

 

Restricting the Type of Information That Is Updated

You can restrict the type of device information that is received and updated.

IMPORTANT

 

While receiving and updating device information, the screen indicating that the settings are being 
updated is displayed. Operations on this machine cannot be performed until the update completes.

Summary of Contents for imagePRESS C1+















































































































































































































































































































































































































































































































































































































































Reviews:

No comments