manualshive.com logo in svg

Canon imagePRESS C1+, Reference Manual, Page: 323 / 622

Share
Download
Canon imagePRESS C1+ Reference Manual Download Page 323

Displaying the Remaining Toner Error Message

6-39

6

Syste

m

 Man

age

r Set

ti

ngs

Displaying the Remaining Toner Error Message

You can set the machine to display a message indicating that the remaining toner is low. This 
message is useful because it gives a user plenty of time to check their toner stock, and ensure 
the availability of replacement toner.

NOTE

 

For instructions on erasing the Display Remaining Toner Error Message screen, see "Erasing the 
Remaining Toner Error Message," on p. 4-62.

1

Press  

➞

 [System Settings] 

➞

 [Display Remaining Toner Error 

Message].

2

Select [On] or [Off] 

➞

 press [OK].

Details of each item are shown below.

[On]:

Displays a warning message indicating that the remaining toner is low. This 
message is displayed when the remaining amount of toner is less than 10%. You 
can clear the message screen by pressing [Done]; however, the message will be 
displayed every time the machine returns from the Sleep mode, Energy Saver 
mode, and Low-Power mode, until the toner cartridge is replaced.

[Off]: 

The warning message indicating that the remaining toner is low is not displayed.

Summary of Contents for imagePRESS C1+















































































































































































































































































































































































































































































































































































































































Reviews:

No comments