manualshive.com logo in svg

Canon imagePRESS C1+, Reference Manual, Page: 308 / 622

Share
Download
Canon imagePRESS C1+ Reference Manual Download Page 308

Auto Online/Offline

6-24

6

Syste

m

 Man

age

r Set

ti

ngs

Auto Online/Offline

To use the optional Network Scan function, the machine must be connected to a network, and 
must be separately switched online to the network. This section explains how to switch the 
machine online and offline to use the Network Scan function.

NOTE

 

•

[Auto Online/Offline] appears only if the optional Color UFR II/PCL/PS Printer Kit is available or 
imagePRESS Server is installed.

•

For more information on the Network Scan function, see the Network ScanGear Guide.

 

Auto Online

If Auto Online is set to 'On', the machine automatically goes online when you press [Scan] on 
the Basic Features screen.

1

Press  

➞

 [System Settings] 

➞

 [Auto Online/Offline] 

➞

 [Auto Online].

2

Select [On] or [Off] 

➞

 press [OK].

Summary of Contents for imagePRESS C1+















































































































































































































































































































































































































































































































































































































































Reviews:

No comments