Canon imagePRESS C1+, Reference Manual, Page: 246 / 622

Adjusting the Machine 4-76
4
Customizing S
e
ttings
Densitometer Correction
1
Press
➞
[Adjustment/Cleaning]
➞
[Shading Correction].
2
Press [Densitometer Correction].
3
Press [Test Print].
CAUTION
Only 330 mm x 483 mm, 320 mm x 450 mm (SRA3), 305 mm x 457 mm, 11" x 17", A3,
LTR, or A4 plain paper can be used for test prints. Make sure that a sufficient supply of
paper is loaded into the machine before starting this procedure.
4
Gauge the mark on the output test print using the densitometer.
5
Press [Fine Adjust] of the colour you want to adjust.
6
Select the number
➞
enter the gauged density value of the mark of the
same number on the test print
➞
press [OK].
NOTE
The colour patterns on the test print are laid out in numeric order (1 to 7) when the cyan patterns
are on top.
7
Press [Store and Finish].
NOTE
If [Test Print] is pressed before pressing [Store and Finish], a test print with colour patterns after
adjustment is output.