manualshive.com logo in svg

Canon imagePRESS C1+, Reference Manual, Page: 229 / 622

Share
Download
Canon imagePRESS C1+ Reference Manual Download Page 229

Specifying Common Settings

4-59

4

Customizing S

e

ttings

 

Data Compression Ratio for Remote Scans

You can set the compression ratio for network scanning. A high compression ratio reduces the 
amount of memory used for scanning the document, but results in a lower image quality. On the 
contrary, a low compression ratio increases the amount of memory used for scanning the 
document, but results in a higher image quality.

NOTE

 

•

[Data Compression Ratio for Remote Scans] appears only if the optional Color UFR II/PCL/PS Printer 
Kit or imagePRESS Server is available for use.

•

For more information on the Network Scan function, see the Network ScanGear Guide.

1

Press  

➞

 [Common Settings] 

➞

 [Data Compression Ratio for Remote 

Scans].

2

Select [High Ratio], [Normal], or [Low Ratio] 

➞

 press [OK].

Details of each item are shown below.

[High Ratio]:

A small amount of memory is used for scanning the document, but the 
images have a lower image quality.

[Normal]:

The amount of memory used for the document and the quality of the images 
are moderate. The compression ratio is between the High Ratio and Low 
Ratio settings.

[Low Ratio]:

A large amount of memory is used for the document, but the images have a 
higher image quality.

Summary of Contents for imagePRESS C1+















































































































































































































































































































































































































































































































































































































































Reviews:

No comments